Test your smoke alarm by pushing the Test/Hush button on the cover and holding it down for a minimum for 5 seconds. This will sound the alarm if the electronic circuitry, horn, and battery are ...

· Check smoke alarm batteries. When turning the clocks back, take a few minutes to replace the smoke alarm batteries if needed and push the test button to make sure the alarms are working.

Park also warns that some smoke alarms may beep every minute for up to 15 minutes if the Silence/Test button is accidentally pressed. Park warns the location of your smoke alarm can also ...

Daylight saving time begins on March 10, and the American Red Cross encourages everyone to test their smoke alarms as they turn their clocks forward to make sure the devices are working.

You can manually test smoke alarms by pressing and holding the ''test'' button. If it beeps, or rings loudly, it means it is working properly.

At a glance Expert's Rating Pros ・Voice alerts inform you which room smoke has been detected in ・Interconnectivity for local ...

Staff report Daylight saving time begins at 2 a.m. Sunday in Ohio, and the state fire marshal’s office says this is the time to test smoke alarms while moving clocks ahead one hour. “Smoke ...

The LED status indicator keeps you informed about the detector's status at a glance. Easily test the functionality using the convenient alarm test button.

After you change your clocks for the end of daylight saving time on Nov. 7, 2021, it's also a good idea to test your smoke alarms.

SPOKANE, Wash. — Daylight Saving Time ends on Sunday, November 5, and the American Red Cross wants you to test your smoke alarm at your home before you turn your clocks back an hour.

Muscatine fire officials are encouraging residents to not only adjust their clocks for Daylight Saving Time but also check and replace the batteries in their smoke and carbon monoxide detectors.