Hello,<BR>I have just built a new system with a SATA HDD and want to use my old drives(IDE - one of them use to be master on my old PC). What do I need to do for the system to boot from SATA and not ...

So, a recent issue with a fusion drive in a 2012 iMac resulted in a loooong but generally successful, period of data recovery, and I was able to create a new fusion drive with the same HW. The SATA HD ...

When building a new PC or home lab server, the immediate assumption is that NVMe SSDs would be the better choice for ...

After checking the Intel Product Compatibility Tool, I populated the system with two 16-GB SO-DIMMs for a total of 32GB of RAM (Corsair 32GB Kit 16GBx2 DDR4 2400 MT/S), and installed a 1.8 TB SATA SSD ...

If you have a SATA drive that you want to connect to your PC and move data to and from, this is a fantastic accessory to do it. When you purchase through links on our site, we may earn an affiliate ...

For storage, I will be using an M.2 SATA SSD and a 256GB thumb drive. I will also be using an Ubuntu VM to test the SATA drive to see what kind of throughput I can get from the M.2 drive. Although ...

Installing a new SSD should be a relatively straightforward process, but there’s a couple of nuisances you may run into. Perhaps the biggest offender is that your SSD decides to do a no-call-no-show ...

When replacing the hard drive on your older notebook computer, you'll need to know whether the drive is a Serial ATA or Parallel ATA connection. If the notebook is only a few years old, it almost ...